
Disturbances in picture and sound can often be eliminated
by checking the symptoms and following the suggestions
listed below.
SYMPTOM
Poo_ or no picture
(Screen not lit),
good sound
Good picture,
no sound
No picture (screen
not lit), no sound
No color
Snow and noise
only
r _ -
.,._-:2 . _. € . Dotted
!m-_*_":_i'7' _"'I lines
, _ _ _
i _'_[_"_"_UJ or
t,,_'_,4_-- _ stripes
I _ Double
'_ orimagesghosts
CHECK AND ADJUST
• Adjust PICTURE.
• Adjust BRIGHT.
• Check antenna/cable
connections.
• Press VOLUME + on the
TV or VOL + on the
Remote Commander.
• Press MUTING on the
Remote Commander.
• Check that the MTS button
is set correctly.
• Check that the TV/VIDEO
button is set correctly.
• Set the SPEAKER SW
(switch) to ON.
• Is POWER switched on?
• Plug the unit into a wall
outlet.
• Check that the TV/VIDEO
button is set correctly.
• Is it a color program?
• Adjust COLOR.
• Is it an active or the
correct channel?
• Check the CABLE
setting.
• Check the ANT/AUX
button setting.
• Check antenna/cable
connections.
This is often caused by local
interference. (e.g. cars, neon
signs, hairdryers etc.) Adjust
antenna for minimum inter-
ference.
Reflections from nearby
mountains or buildings often
cause this problem.
A highly directional outdoor
antenna or a CATV cable
may improve the picture.
Try another channel. It could be station trouble.
If the problem persists, contact your nearest service facility.
Sony Corporation Printed in U.S.A