A SERVICE OF

logo

19
Voltage Selector for COM2 Connector: 5V-12V
This VCC selector is to determine the input voltage of each COM
connector.
Setting 1 2 3 4
+5V ON ON OFF OFF
+12V OFF OFF ON ON
Normal (default) OFF ON ON OFF
BIOS Write Protect: WP-1
This jumper enables or disables the Write Protect function for the BIOS.
Setting 1 2 3
Normal (default) ON ON OFF
Write Protect OFF ON ON
EEPROM Write Protect: WP-2
This jumper enables or disables the Write Protect function for the
EEPROM.
Setting 1 2 3
Normal (default) ON ON OFF
Write Protect OFF ON ON
LAN Bypass: BYPASS
This jumper enables or disables the LAN bypassing function.
Setting 1 2 3
Enable (default) ON ON OFF
Disable OFF ON ON