A SERVICE OF

logo

41
Integrated Peripherals
Onboard IDE Channel 0
Settings: [Disabled, Enabled]
IDE HDD Block Mode
Automatic detection of the optimal number of block read/writes per
sector the drive can support.
Settings: [Disabled, Enabled]
SATA Controller
Settings: [Disabled, Enabled]
SATA Controller Mode
Controls the features of the Serial ATA controller within the South
Bridge. Serial ATA is the latest generation of the ATA interface. Serial
ATA hard drives deliver transfer speeds of up to 300MB/sec.
Settings Description
IDE Supports two PATA hard disk drives. Disables RAID
and AHCI function.
RAID Only SATA supports RAID and AHCI function
AHCI Enable the AHCI function such as Native Command
Queuing and Hot Plug function