A SERVICE OF

logo

DTP32HS DENSITOMETER
11
6. Position Base Assembly over Bottom Plate and insert tabs into openings. The Base is
positioned properly when it snaps into place
Cleaning the Reflection Reference
The reflection reference can be cleaned with a lint free cloth whenever required. Make sure
to return the reference to its protective case when finished. Always handle the
calibration reference by the edges.
If required, a new calibration reference can be ordered from X-Rite. Order calibration
reference part number DTP32HS-100-KIT.
Idler Roller(s)
Base Surface
Idler Roller(s)
Idler Roller(s)
Drive Wheel(s)
Bottom Plate Surface
Serial Number Plate