A SERVICE OF

logo

DTP32HS DENSITOMETER
4
Instrument Interface
The DTP32HS must be interfaced directly with one of the computer’s Serial ports. For
attachment to a Mac Mini-DIN 8 Serial Port, you need to use the optional adapter (P/N
SE108-DB9PA-01).
1. Quit all programs and shut down the computer before installing interface cabling.
2. Connect the interface cable as shown.
CAUTION: Use only the 100-240VAC input, +12VDC output Switching Power Supply to
power the instrument.
3. Plug the small end of the switching power supply into the power input connector
of the interface cable.
4. Plug the detachable line cord into the power supply and then into the AC wall
receptacle. The instrument does not have an ON/OFF switch.
PC
DB9
AC Wall
Receptacle
+12VDC Switching
Power Supply
Detachable Line Cord
Power Input
SE108-97-02
Interface Cable
MAC
Mini-DIN 8
SE108-DB9PA-01
(optional)