DTP32HS DENSITOMETER
2
Warranty Information
X-Rite, Incorporated warrants each instrument manufactured to be free of defects in material and
workmanship for a period of twelve months. If the fault has been caused by misuse or abnormal
conditions of operation, repairs will be billed at a nominal cost. In this case, an estimate will be submitted
before work is started, if requested. The unit shall be returned with transportation charges prepaid.
THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS. THIS WARRANTY OBLIGATION IS
LIMITED TO SERVICING THE UNIT RETURNED TO X-RITE, INCORPORATED OR AN AUTHORIZED SERVICE
DEALER FOR THAT PURPOSE.
X-Rite, Incorporated offers a repair program for instruments out of warranty. For more information,
contact X-Rite Customer Service Department. Always include serial number in any correspondence
concerning the unit. The serial number is located on the bottom plate of the instrument.
This agreement shall be interpreted in accordance with the laws of the State of Michigan and jurisdiction
and venue shall lie with the courts of Michigan as selected by X-Rite, Incorporated.
Table of Contents
Overview and Setup 3
Instrument Description 3
Unpacking and Inspection 3
Instrument Interface 4
Instrument Location Requirements 5
Strip Feeding Requirements 5
Instrument LED Indicator 5
Strip Positioning and Patch Requirements 6
Calibration 7
Frequency of Calibration 7
Reflection Reference Handling 7
Calibration Procedure 7
Strip Measurement 8
Important Notes 8
Strip Positioning and Measurement Techniques 8
Troubleshooting, Service, and General Maintenance 9
Troubleshooting 9
Service Information 10
General Maintenance 10
Cleaning the Reflection Reference 11
Technical Information 12
Instrument Reset 12
Drive Wheels Rotation Timer 12
Technical Notes 12
Instrument Specifications - Pending 13
General 13
Performance 13
Environmental 14
Safety Compliance 14
Standard Accessories 14
Optional Accessories 14
Operational Considerations Between a DTP32R and a DTP32HS 15
Operation 15
Barcode Operation 16
