CONTROLS AND FUNCTIONS
5
INTRODUCTION
1 STANDBY/ON
Turns on the main unit only or sets it to the standby mode.
When you turn on the main unit, there will be a 6 to 7
second delay before the main unit can reproduce sound.
• In the standby mode, this unit consumes a small amount of
power in order to receive infrared-signals from the remote
control.
• You can turn on the main unit, Zone 2 and Zone 3 or set them to
the standby mode simultaneously using the remote control.
For details, see page 85.
2 INPUT selector
Selects the input source you want to listen to or watch.
3 AUDIO SELECT
Toggles the priority for the type of audio input jack
(AUTO, i.LINK, HDMI, COAX/OPT, ANALOG) when
one component is connected to two or more input jacks on
this unit (see page 40).
4 MULTI CH INPUT
Selects the source connected to the MULTI CH INPUT
jacks. When selected, the MULTI CH INPUT source takes
priority over the source selected with the INPUT selector
(or the input selector buttons on the remote control).
5 A/B/C/D/E
Selects one of the 5 preset station groups (A to E) when
the unit is in the tuner mode (see page 44).
6 PRESET/TUNING l / h
Selects preset station number 1 to 8 when the unit is in the
tuner mode and the colon (:) is displayed next to the band
indication in the front panel display.
Selects the tuning frequency when the unit is in the tuner
mode and the colon (:) is not displayed.
See pages 41 to 44 for details.
7 Front panel display
Shows information about the operational status of this
unit.
8 PRESET/TUNING (EDIT)
Switches the function of PRESET/TUNING l / h
between selecting preset station numbers and tuning when
the unit is in the tuner mode (see pages 41 to 44).
9 FM/AM
Switches the reception band (FM or AM) when the unit is
in the tuner mode (see page 41).
0 MEMORY (MAN’L/AUTO FM)
Stores a station in the memory when the unit is in the tuner
mode. Hold down this button for more than 3 seconds to
start automatic preset tuning (see pages 42 to 43).
A TUNING MODE (AUTO/MAN’L)
Switches the tuning mode between automatic (“AUTO”
indicator on) and manual (“AUTO” indicator off) when
the unit is in the tuner mode.
CONTROLS AND FUNCTIONS
Front panel
A
SPEAKERS
B
MULTI CH
INPUT
AUDI O
SELECT
TONE
CONTROL
STRAIGHT
PRESET/
TUNING
EDIT
MAN'L/AUTO FM AUTO/MAN'L EFFECT
TUNING
MODE
MEMORY
MAIN ZONE 2
ZONE ON/OFF
ZONE 3
ZONE CONTROL
FM/AM
A/B/C/D/E
SOURCE/
REMOTE
REC OUT/ZONE 2
SILENT CINEMA S VIDEO VIDEO L
VIDEO/AUX
AUDIO R OPTICAL
PHONES
PRESET/
TUNING
OPTIMIZER
MIC
VOLUME
PROGRAM
INPUT
PURE DIRECT
STANDBY
/ON
MD/TAPEDVD
DTV
CBL/SAT
VCR 1
CD-R
TUNER
CD
DVR/
VCR 2
FI MNLKJHG
1 2 34 5 6 7 890A B D E
C
Notes
