Dimension ES-3024 Ethernet Switch
Commands Introduction 21-11
COMMAND DESCRIPTION
enable
Enables 802.1X security on the
switch.
disable
Disables 802.1X security on the
switch.
status
Shows switch 802.1X security
status.
port
Enables 802.1X security on the
specified port.
Disables 802.1X security on the
specified port.
reauth <port_no> <on|off>
Turns re-authentication on or off
on the specified port.
reauthperiod
<port_no><value>
Configures how often the
specified port should be re-
authenticated.
Displays 802.1X security status
on the specified port.
set
Sets whether an external
RADIUS server or the internal
switch user database performs
authentication.
portcontrol<port-no><auto |auth |
unauth>
Sets how the specified port
should be authenticated.
radius
server <ip>
Sets the external RADIUS server
IP address.
secret <secret>
Sets the external RADIUS server
password.
Sets the external RADIUS server
port number.
show
Displays the external RADIUS
server settings.
profile
Internal switch user database.
Information in this database is
flushed on restarting the switch.
Creates a username and
password profile in the internal
switch user database.
delete <idx>
Deletes a username and
password profile in the internal
switch user database.
