A SERVICE OF

logo

Dimension ES-3024 Ethernet Switch
12-4 Bandwidth Control Setup
Table 12-2 Bandwidth Control Setup Edit
LABEL DESCRIPTION
Destination The next three fields pertain to the destination MAC address and destination port.
MAC Address Type a MAC address in valid MAC address format, that is, six hexadecimal character
pairs or click All Entries to apply the filter rule to all MAC addresses.
VID Type the VLAN identification number.
Port Select the port to which the bandwidth control rule should apply. You may choose one
port only or all ports (All Ports).
Click Apply to save your changes back to the switch or click Cancel to begin configuring this screen afresh.