Chapter 45 Introducing Commands
ES-4124 User’s Guide
352
classifier <name> <[packet-
format
<802.3untag|802.3t
ag| EtherIIuntag|
EtherIItag>]
[priority <0-7>]
[vlan <vlan-
id>][ethernet-type
<ether-num|ip|ipx|
arp|rarp|
appletalk|decnet|
sna|netbios|dlc>]
[source-mac <src-
mac-addr>]
[source-port
<port-num>]
[destination-mac
<dest-mac-addr>]
[dscp <0-63> ]
[ip-protocol
<protocol-
num|tcp|udp|icmp|e
gp|
ospf|rsvp|igmp|
igp|pim|ipsec>
[establish-only]]
[source-ip <src-
ip-addr> [mask-
bits <mask-bits>]]
[source-socket
<socket-num>]
[destination-ip
<dest-ip-addr>
[mask-bits <mask-
bits>]]
[destination-
socket <socket-
num>] [inactive]>
Configures a classifier. A
classifier groups traffic into data
flows according to specific
criteria such as the source
address, destination address,
source port number, destination
port number or incoming port
number.
13
help Displays help information for this
command.
13
cluster <vlan-id> Enables clustering in the
specified VLAN group.
13
member <mac-
address> password
<password-str>
Sets the cluster member. 13
name <cluster
name>
Sets a descriptive name for the
cluster.
13
rcommand <mac-
address>
Logs into the CLI of the
specified cluster member.
13
default-
management
<in-band|out-of-
band>
Specifies through which traffic
flow the Switch is to send
packets.
13
Table 141 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
