Chapter 45 Introducing Commands
ES-4124 User’s Guide
371
http <socket-
number> <timeout>
Allows HTTP access on the
specified service port and
defines the timeout period.
13
https <socket-
number>
Allows HTTPS access on the
specified service port.
13
icmp Allows ICMP management
packets.
13
snmp Allows SNMP management. 13
ssh <socket-
number>
Allows SSH access on the
specified service port.
13
telnet <socket-
number>
Allows Telnet access on the
specified service port.
13
snmp-server [contact <system
contact>]
[location <system
location>]
Sets the geographic location
and the name of the person in
charge of this Switch.
13
get-community
<property>
Sets the get community. 13
set-community
<property>
Sets the set community. 13
trap-community
<property>
Sets the trap community. 13
trap-destination
<ip>
Sets the IP addresses of up to
four stations to send your SNMP
traps to.
13
trap-destination
<ip>
[udp-port
<socket-
number>]
[version
<v1v2cv3][usern
ame<name>]
Sets the IP address of an SNMP
manager. You can configure up
to four managers to send your
SNMP traps to.
13
trap-destination
<ip> enable traps
Enables sending SNMP traps to
a manager.
13
aaa Enables sending all AAA type
traps to a manager.
13
aaa <options> Enables sending specific AAA
traps to a manager. The options
are “authentication” or
“accounting”.
13
help Displays help information for
SNMP trap commands.
13
interface Enables sending all interface
type traps to a manager.
13
interface
<options>
Enables sending all interface
type traps to a manager. The
options are “linkup”, “linkdown”
and “autonegotiation”.
13
ip Enables sending all IP type
traps to a manager.
13
Table 141 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
