A SERVICE OF

logo

Open as PDF
next previous
GS2200-24 User’s Guide
121
CHAPTER 12
Filtering
12.1 Overview
This chapter discusses MAC address port filtering.
Filtering means sifting traffic going through the Switch based on the source and/or
destination MAC addresses and VLAN group (ID).
12.1.1 What You Can Do
Use the Filtering screen (Section 12.2 on page 121) to create rules for traffic
going through the Switch.
12.2 Configure a Filtering Rule
Use this screen to create rules for traffic going through the Switch. Click
Advanced Application > Filtering in the navigation panel to display the screen
as shown next.
Figure 65 Advanced Application > Filtering