Chapter 21 VLAN Stacking
GS2200-48 User’s Guide
173
21.4 Configuring VLAN Stacking
Click Advanced Applications > VLAN Stacking to display the screen as shown.
Figure 76 Advanced Application > VLAN Stacking
The following table describes the labels in this screen.
Table 54 Advanced Application > VLAN Stacking
LABEL DESCRIPTION
Active Select this checkbox to enable VLAN stacking on the Switch.
SP TPID SP TPID is a standard Ethernet type code identifying the frame and indicates
whether the frame carries IEEE 802.1Q tag information. Choose 0x8100 or
0x9100 from the drop-down list box or select Others and then enter a four-
digit hexadecimal number from 0x0000 to 0xFFFF. 0x denotes a hexadecimal
number. It does not have to be typed in the Others text field.
Port The port number identifies the port you are configuring.
* Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use
this row first to set the common settings and then make adjustments on a port-
by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make
them.
