150
<portlist>
[pppoe|ip|arp|n
etbios|dhcp|eap
ol|igmp|none]
Se
s the packet type filte
fo
a
specific port.
none accepts all packets. This
command disables the
pktfilter
pppoeonly <portlist>
command.
Uses this command to allow only
PPPoE traffic. It drops any non- PPPoE
packets.
This command disables the
pktfilter set <portlist>
[pppoe|ip|arp|netbios|dhc
p|eapol|igmp|none]
command.
Se
s IEEE 802.1
to use the local
profiles or an external RADIUS
server for authentication.
Turns on IEEE 802.1
fo
specific ports.
Turns off IEEE 802.1X for
specific ports.
Sets the IEEE 802.1X port
authentication option for specific
ports.
Sets the IEEE 802.1X re-
authentication option for specific
ports.
Sets the IEEE 802.1X re-
authentication period for specific
ports.
MSAP2000 AAMS User’s Guide
Table 58 Commands (continued)
COMMAND DESCRIPTION
delete <port> Removes a MAC filter MAC entry.
<mac> [<mac>
<mac> ...]
pktfilter
See Section 28.13 on page 242 for
how to configure packet filters.
show [portlist] Displays packet type filter settings.
set
dot1x
show [portlist]
Displays IEEE 802.1X settings.
enable Turns on IEEE 802.1X.
disable Turns off IEEE 802.1X.
auth <profile|radius
>
port
enable
<portlist>
disable
<portlist>
control
<portlist>
<auto|auth|unau th>
reauth
<portlist>
<on|off>
period
<portlist>
<period>
radius
show
Displays the external RADIUS server
settings.
ip <ip> Sets the external RADIUS server IP
address.
