A SERVICE OF

logo

235
Displays the device’s configuration.
MSAP2000 AAMS User’s Guide
C HAPTER 30
Config Commands
This chapter describes the config commands.
30.1 Config Commands Summary
The following table lists the config commands you can use with the
MSAP2000 AAMS.
Table 66 Config Commands
COMMAND DESCRIPTION
config
show <sys|sw|adsl
|ip|stat|all
> [nopause]
save
Saves the current configuration.
restore Reloads the factory default
configuration.
30.2 Config show Command Example
Syntax:
ras> config show <sys|sw|adsl|ip|stat|all> [nopause]
This command shows the configuration of the specified category. nopause allows
you to show all settings at one time so you do not need to press a key to continue.
An example is shown next.