A SERVICE OF

logo

168
MSAP2000 AAMS User’s Guide
C HAPTER 26
ADSL Commands
This chapter describes some of the ADSL commands that allow you to configure and monitor
the ADSL ports.
26.1 ADSL Standards Overview
See the web configurator chapter on ADSL for background information. Refer to
Section 5.3 on page 60 for the settings of the default profile and ADSL port default
settings.
26.2 ADSL Commands Summary
The following table lists the adsl commands you can use with the MSAP2000
AAMS.
Table 60 ADSL Commands
COMMAND DESCRIPTION
adsl
show [portlist]
Displays the ADSL settings.
enable <portlist> Turns on the specified ADSL
ports.
disable <portlist> Turns off the specified ADSL
ports.
profile
show [profile] Displays profile contents.
set <profile> Creates an ADSL profile.
<fast|
interleave
[=<up delay>,<down
delay>]> <up max
rate> <down max
rate> [<up target
margin>
<up min margin>
<up max margin>
<up min rate>
<down target margin
> <down min margin>
<down max margin>
<down min rate>]