Chapter 7 Wireless
VSG1435-B101 Series User’s Guide
105
7.3 The More AP Screen
This screen allows you to enable and configure multiple Basic Service Sets (BSSs)
on the ZyXEL Device.
Click Network Settings > Wireless > More AP. The following screen displays.
Figure 29 Network Settings > Wireless > More AP
The following table describes the labels in this screen.
Encryption Select the encryption type (AES or TKIP+AES) for data encryption.
Select AES if your wireless clients can all use AES.
Select TKIP+AES to allow the wireless clients to use either TKIP or
AES.
WPA2 Pre-
Authentication
This field is available only when you select WPA2.
Pre-authentication enables fast roaming by allowing the wireless client
(already connecting to an AP) to perform IEEE 802.1x authentication
with another AP before connecting to it. Select Enabled to turn on
preauthentication in WAP2. Otherwise, select Disabled.
Network Re-auth
Interval
Specify how often wireless stations have to resend usernames and
passwords in order to stay connected.
If wireless station authentication is done using a RADIUS server,
the reauthentication timer on the RADIUS server has priority.
Group Key
Update Timer
The Group Key Update Timer is the rate at which the RADIUS server
sends a new group key out to all clients.
Table 13 Wireless > General: More Secure: WPA(2)
LABEL DESCRIPTION
Table 14 Network Settings > Wireless > More AP
LABEL DESCRIPTION
# This is the index number of the entry.
Status This field indicates whether this SSID is active. A yellow bulb signifies
that this SSID is active. A gray bulb signifies that this SSID is not active.
