Filter
Top Products
5 PREVIEW THE DISPLAYS
5 4
Wireless Sensor Display
Press the “MODE” button inside the back of the wireless sensor to display temperature
and/or humidity in one of three ways:
1)Temperature continuously,
2)Humidity continuously, or
3)Temperature for 5 seconds, then humidity for 5 seconds
NOTE: The sensor’s display setting does not affect the main unit’s display.
86.5
F
1
25
1
86.5
F
1
25
1
Channel
(sensor #)
(Alternate icon)
Display Mode 1
(Temperature)
Display Mode 2
(Humidity)
Display Mode 3
(alternating temp. & Humidity)
press
“mode”
button
press
“mode”
button
Function Buttons
Indoor Temperature
and Humidity
Outdoor Temperature
and Humidity
Moon Phase Low Battery
Indicator
Clock Sets Itself
Atomic Clock Signal
Trend Indicators Calendar Sets Itself
MAIN UNIT FUNCTION BUTTONS
( top of main unit )
Using the included LOW TEMPERATURE ADAPTOR
NORMAL
TEMPERATURES
NORMAL
TEMPERATURES
Wireless Sensor is
weather-resistant and
can be placed outdoors
The wireless sensor will operate normally down to -4 ºF. Below -4 ºF, the electronics
may operate erratically or become non-functional until the temperature raises again.
In case temperatures fall below -4ºF, bring the wireless sensor indoors and use the
included low temperature adaptor by running the wire out through a soft seal opening
such as a window or door. When routing the wire for the low temperature adaptor,
make certain that the wire will not be severed or damaged.
WIRELESS
SENSOR
LOW-TEMP.
ADAPTOR
LOW-TEMP.
SENSOR
EXTREMELY LOW
TEMPERATURES
low-temp adaptor
is used outside to
observe temperature
Wireless Sensor is
protected indoors in
extreme temperatures
INDOOR OUTDOOR
-4 ºF
NOTE: The wired TEMPERATURE ADAPTOR only observes temperature, not humidity.
If the adaptor is placed outdoors, and the wireless sensor is indoors- the wireless
sensor will only transmit the indoor humidity reading & the outdoor temp. reading.
EXTREMELY LOW
TEMPERATURES
OR LOWER