Filter
Top Products
CH 99 (bottom line) Indicates the storage channel
CH indication flashes If the initiated storage operation
(bottom line) is not completed by pressing the
store key
F (bottom line) Indication that the selected
storage channel is not occupied
V 11.7 (bottom line) Indication of supply voltage
All indicating segment Supply voltage £ 10.5 V
flashes
CS 99 (bottom line) Indication of scan function
4 Squelch key SQL Switching the squelch on or off
(muting)
5 MDE key Selection of mode
6 Exchange key Mode 1:
Exchange of preset
frequency and active frequency
Other modes :
Reset to Mode 1 and acceptance
of momentarily active frequen
cy with this frequency being
stored at the same time as the
preset frequency
7 Frequency selector switch Switching the indicated frequency
(outer rotary switch) in 1 MHz steps or the storage
channel upwards or downwards
in steps of 10
Operating Instructions
Page 10 Issue 05/2000
o
Basic settings in the service mode
The volume settings given in the service mode are set by the factory as
basic settings using standard values. If reversion to the standard values
is required, the portable VHF station must be switched off and switched
on again by simultaneously pressing the STO and MDE keys.
o
Ending of the service mode
The portable VHF stationmust be switched off toend the service mode.
Becker GK 415 - ( )
Issue 05/2000 Page 31