Filter
Top Products
p
Setting the IC level 24
p
Calibrating the temperature sensor 24
p
Setting addressable storage locations 1 to 99 24
p
Setting the temperature display in °C or °F 25
p
Switching on the scan function 25
p
Setting the hold time in the scan function 25
p
Inhibiting the frequency setting (channel selection only) 26
p
Inhibiting the frequency storage 26
p
Erase stored frequencies 27
p
Setting the “channel start” scanning range 27
p
Setting the “channel end” scanning range 28
p Entry of password to interlock the equipment configuration28
p Setting the dynamic mike input sensitivity 29
p Inhibiting the transmit mode for one or more memory 29
channel (
p
Channel priority ON/OFF switch 30
(option upwarts serial no.: 46)
p
Squelch fast mode (upwarts serial no.: 46) 30
p
Basic settings in the service mode 31
p
Ending of the service mode 31
Technical data 32
Repair instructions 33
p
Equipment manuals 33
Servicing and operation of lead-acid batteries 34
Operating Instructions
Page 2 Issue 05/2000
Blank
Becker GK 415 - ( )
Issue 05/2000 Page 39