Filter
Top Products
Setup
Q-Wash 560Z-LED User Manual Rev. 12 -9-
Mounting
Before mounting this product, read and follow the Safety Notes in this manual.
Orientation
Always mount this product in a safe position with adequate room for ventilation, head
motion, configuration, and maintenance.
Rigging
CHAUVET® recommends following the general guidelines below when mounting this
product.
When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes section.
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
If hanging this product, make sure that the mounting location can support the product’s
weight. Refer to the Technical Specifications section for the weight requirement of this
product.
Procedure
The Q-Wash 560Z-LED comes with two omega brackets to which you can attach clamps.
You must supply your own clamps and make sure that they are capable of supporting the
weight of this product. You will have to use two mounting points per product. The omega
brackets also serve to anchor this product to a panel. For floor standing operation, this
product has built-in rubber feet.
ProductMounting
Diagram
SafetyCable(included)
Clamp(notincluded)
Omegabracket(included)
OverheadMounting
FloorStanding