Filter
Top Products
Operation
Q-Wash 560Z-LED User Manual Rev. 12 -13-
Reset Control
You are able to select how you reset the product, whether from the DMX controller or only
from the control panel.
1. Go to MENU > SPECIAL > RESET.
2. Select DMX or SYSTEM.
DMX:
Enables the DMX controller to reset the product (Control function).
SYSTEM:
Restricts the reset function to the control panel.
Move-in Black
This option enables you to activate or deactivate the move-in black 3-seconds delay.
1. Go to MENU > SPECIAL > BLACK.
2. Select YES to enable the 3 seconds delay or NO to make the blackout immediate.
Power
Use this function to boost the output power for specific, short-term applications.
1. Go to MENU > SPECIAL > POWER.
2. Select NORMAL or HIGH.
The product will return to Normal if the LEDs’ temperature becomes too high.
Color Settings
The COLOR setting determines how the Q-Wash 560Z-LED generates the white color
based on various RGB settings.
1. Go to MENU > SPECIAL > COLOR.
2. Select OFF, RGBTOW, or UC.
UC:
When the RGB faders are set to “255”, the output matches that of less
efficient products (Universal Color).
RGBTOW:
When the RGB faders are all set to “255”, the resulting output is defined by
RGB-W (see MENU > EXTRA > CALIB).
OFF:
When the RGB faders are all set to “255”, the output is maximum, although
the resulting white color may not be balanced.