Filter
Top Products
Operation
Q-Wash 560Z-LED User Manual Rev. 12 -15-
System Default
To restore all the product’s parameters to their default values, do the following:
1. Go to MENU > EXTRA.
2. Press <ENTER> (PASSWORD) will show on the display.
3. Press <ENTER> (**** will show on the display).
4. Enter the password, as explained in Keylock (CALIB will show on the display).
5. Use <UP> to select DEFAULT.
6. Press <ENTER> (NO will show on the display).
7. Select YES and press <ENTER> to restore the product or press <MENU> to exit.
Edit Custom
This function enables you to program up to 255 steps in a single custom program.
1. Go to MENU > EDIT.
2. Press <ENTER> to go to STEP.
3. Press <ENTER> to select a value. The current value (001~255) will show on the LCD.
4. Press <UP> or <DOWN> to select a new value.
5. Press <ENTER> to accept the value.
6. Press <ENTER> to go to PAN.
7. Repeat steps 1 through 6 for TILT, SPEED, RED, GREEN, BLUE, WHITE, DIMMER,
STROBE, ZOOM, DIMSPEED, and TIME.
8. Press <ENTER> to go to USE.
9. Select YES to save the settings for this step or NO to delete them.
10. Repeat steps 3 to 8 for the other steps.
The product will execute all the steps in the CUSTOM program and stop.
To make the product start over add a last step whose duration is 0 seconds.
Example:
Step 1: Time = 5 Use = Yes
Step 2: Time = 4 Use = Yes
Step 3: Time = 6 Use = Yes
Step 4: Time = 0 Use = Yes (This step creates a loop)
Step 5: Time = 0 Use = No
(Unused steps)
Step 255 Time = 0 Use = No