Filter
Top Products
8 Installation - Subtended Network 78-5481-02 09/15/98
Cisco 6100 Set Up and Installation Manual8-2
8.1.1 Cable Diagram - Subtending
The following is an illustration of the basic cabling of a subtended 6100. Some connectors are not
used because they are specific to one of the other configurations of the 6100 or because they have
been reserved for future use.
Figure 8-1 Basic Cabling for Subtending
8.1.2 Cable Type - Subtending
The DS3 subtending I/O card on the subtending host 6100 connects directly to the system
I/O card on the subtended mode 6100. This connection is made with DS3 75-ohm coaxial cable.
Receive
Transmit
Receive
Transmit
System I/O
card
Host MC
backplane
DS3 sudtending
card
System I/O
card
Subtended MC
backplane
16833