Filter
Top Products
2-7
Cisco UCS C420 Server Installation and Service Guide
OL-27640-01
Chapter 2 Installing the Server
Installing the Server In a Rack
c. Push the CMA tab that is labeled INNER RAIL over the end of the inner rail that is attached to the
server, and then release the spring-loaded peg. The peg must align with and enter the hole in the
mounting bracket to lock the CMA in place.
Figure 2-4 Attaching the Cable Management Arm
1 OUTER RAIL CMA tab attached to outer
slide rail
4 Rear of left slide rail assembly
2 INNER RAIL CMA tab attached to inner slide
rail on server
5 INNER RAIL CMA tab attached to inner slide
rail on server
3 Rear of left slide rail assembly 6 OUTER RAIL CMA tab attached to outer
slide rail
6
4
5
1
2
3
Top View
Side View
330535