Filter
Top Products
A-2
Cisco UCS C460 Server Installation and Service Guide
OL-22326-01
Appendix A Server Specifications
Environmental Specifications
Environmental Specifications
Table A-2 lists the environmental specifications for the server.
Power Specifications
Table A-3 lists the specifications for each 1200 W power supply (Cisco part number UCSC-PSU2-1200).
You can get more specific power information for your exact server configuration by using the Cisco UCS
Power Calculator:
http://www.cisco.com/assets/cdc_content_elements/flash/dataCenter/cisco_ucs_power_calculator/
Table A-2 Environmental Specifications
Description Specification
Temperature, operating 5ºC to 35ºC (41ºF to 95ºF)
Temperature, nonoperating
(when the server is stored)
–40ºC to 65ºC (–40ºF to 149ºF)
Humidity, nonoperating 10% to 90%
Altitude, operating
Derated 1ºC for each 305 m
0 m to 3048 m (0 ft to 10,000 ft)
Altitude, nonoperating
(when the server is stored)
0 m to 12,192 m (0 ft to 40,000 ft)
Table A-3 1200 W Power Supply Specifications
Description Specification
AC input voltage 200 to 240 VAC nominal (Range: 180 to 264 VAC)
Low AC input voltage
(limited to 800 W system configurations)
100 to 120 VAC nominal (Range: 90 to 132 VAC)
AC input frequency 50 to 60 Hz nominal (Range: 47 to 63 Hz)
Maximum AC-input current 10 A
Maximum output power for each power
supply
1200 W (up to two power supplies can be installed)
Power supply output voltage Main power: 12 VDC
Standby power: 12 VDC