Filter
Top Products
Operating Your Radio
27
Nothing Comes Close to a Cobra
®
Standby/Receive
and Transmit
26
English
Bluetooth
®
Mode Pairing
and Programming
Operating Your Radio
Programming these features will allow your radio to listen to all NOAA Hazard Alert
radio channels.
Start from WX Alert Standby mode to begin WX Alert Setup programming. Press and
hold the Call/Enter/Setup button for two (2) seconds to enter the programming mode.
To Set WX Alert On or Off:
1. WX Alert mode is the first mode that begins
WX Alert Setup programming.
2. Display will show WX Alert icon and ON or OFF flashing.
3. Press Channel Up/Down button to select ON or OFF.
4. Press Call/Enter/Setup button to save this entry and
move to the next setup programming mode.
To Set WX Auto Search (SCAN) On or Off:
1. Display will show Weather icon and SCAN icons,
ON or OFF is flashing.
2. Press Channel Up/Down button to select ON or OFF.
3. Press the Call/Enter/Setup button to save entry.
You have now ended the WX Setup programming mode and
will enter the WX Alert Standby mode.
NOTE
When WX Auto Search (SCAN) is set to On, weather
channel scanning will start automatically and scan all
available weather channels until the strongest channe
l
is found. This will happen under the following
conditions:
■ WX Alert is engaged.
■ Radio is in VHF Standby.
■ WX received signal level falls below
a preset level.
Weather (WX) Mode Programming
WX Alert On/Off
WX Auto Search (SCAN)
Bluetooth Radio On/Off
This setting allows you to turn On and Off the small Bluetooth
radio inside this VHF radio. The default setting
is ON. Turning it Off can save some power. It can easily
be switched On at any time.
To Set Bluetooth On and Off:
1.
Display will show the word blue and ON or OFF flashing.
2.
Press Channel UP/Down button to select ON or OFF.
3. Press the Call/Enter/Setup button to save this entry.
You have now ended Bluetooth Setup mode programming
and will enter Standby/Receive and Transmit programming.
BluetoothRadio On
BluetoothRadio Off