Filter
Top Products
41
Nothing Comes Close to a Cobra
®
40
English
Mobile Phone Operation
With Bluetooth
®
VHF Marine Radio Protocols
Operating Your RadioVHF Marine Radio Protocols
Mobile Phone Operation
With Bluetooth
®
Operating Your Radio
Answer Incoming Phone Calls
This handheld radio, once properly paired to your Bluetooth
®
compatible mobile phone, can answer incoming calls received
on your mobile phone. It can act as the speaker and microphone,
while your mobile phone stays safe and dry. It will also
improve audio quality on both ends of the conversation.
To Answer and End an Incoming Call:
1. The speaker on the HH475 will ring. The display will
change and show the word “AnSEr” as shown.
2. Press and release the Bluetooth button on the MR
HH475BT front panel. After the call is answered, the
LCD will switch to “Connct” as illustrated.
3. Begin conversation with the caller by a pressing the
PTT (Push to Talk) key and speaking into the small
microphone above the LCD. This is very similar to a
standard radio operation and it completely eliminates
all background noise when you are not speaking.
NOTE
To enable hands free conversation or “VOX” mode
(pressing in the PTT key not required), use the
Channel Up and Channel Down keys anytime when
in Bluetooth mode. The “VOX” icon will turn on when
VOX mode is enabled.
The Bluetooth “VOX” setting does NOT reset to Off
after a power cycle unlike the normal VOX associated
with VHF mode.
4. To end a call, press and release the Bluetooth button.
The HH475 will then return to previous Standby mode
and resume normal operation.
Answering a Call
NOTE
Please refer to the Bluetooth Mode Pairing and Programming section on
page 23 for instructions on how to pair your mobile phone with this device,
change ring tones, etc. The following section covers how to complete a
phone call and other basic operations.
Mobile Phone Operation with Bluetooth
®
BluetoothButton
Initiate a Phone Call
There are several ways to initiate a call. These include;
initiating (as normal) from the mobile phone, using voice
dialing and last number redial.
To Initiate from the Mobile Phone
1. Simply dial a number on your mobile phone.
(See manufacturer’s instructions for making a call.)
When the phone’s Send key is pressed, the HH475
will respond by changing over to Bluetooth mode
and displaying “diaLng” as illustrated.
2. You will see “Connct” when the receiving party, or
their voice mail, answers.
3. To end a call, press and release the Bluetooth button.
The HH475 will then return to previous Standby mode
and resume normal operation.
Initiating a Call
Connected to a Call
Connected to a Call