Cobra Electronics MR HH475 Marine Radio User Manual


 
38
English
39
Nothing Comes Close to a Cobra
®
Rewind Operation
VHF Marine Radio Protocols
Operating Your RadioVHF Marine Radio Protocols
Rewind Operation
Operating Your Radio
Rewind Button
Rewind-Say-Again
TM
Use the Cobra exclusive Rewind-Say-Again
TM
feature to
replay or record the last 20 seconds of an incoming audio
transmission.
Example 1:
When engine noise, music or conversation creates too
much noise to hear an inbound message clearly, press
the REW button to hear the message a second time.
Example 2:
When listening to an urgent distress message of an
excited caller with confusing background noise, press
the REW button to hear the message a second time and
get life saving information. Use this feature to record
call details including position coordinates, call signs,
registration numbers and store details that will help
authorities locate the distressed vessel.
NOTE
Hold the Rewind button to turn the recording mode
Off and save the currently recorded transmission.
Using Rewind-Say-Again
TM
:
1. During audio transmission, press REW button
to listen to 20 seconds of the last recorded audio
transmission. The REW icon will flash during the
playing back of the message and a 20-second
countdown begins.
2. Press the TALK, REW or MEM/ESC button during
playback to stop the playback transmission. The
radio returns to Marine mode.
Rewind Countdown Timer
SCAN Button Enter Record
Using Rewind-Say-Again
TM
to Record Audio
Transmission:
1. Press and hold SCAN button for two (2) seconds to
enter Record mode.
2. Press and hold TALK button to begin recording
from radio microphone. If TALK button is released,
recording stops. While recording, a 20-second
countdown begins on display. When 20-second
countdown time has ended, recording stops and
two (2) beep tones will be heard.
3. Press and hold SCAN button again for two (2)
seconds or press MEM/ESC button to cancel
recording and return to last operation.
NOTE
When using radio in Record mode, the REW feature
is turned Off to prevent “recording over” previous
message.
Rewind-Say-Again
TM
Feature
Playback Message