Eagle Electronics EVR-100 Marine Radio User Manual


 
EAGLE EVR-100 Operation Instructions 5
This Eagle radio allows you to make a maritime distress call to facilitate search and rescue. To
be effective as a safety device, this radio must be used only within the geographic range of a
shore-based VHF marine Channel 16 distress and safety watch system. The geographic range
may vary but under normal conditions is approximately 20 nautical miles.
Installation Options
There are two ways to install the radio. You can choose:
a deck or overhead mounted gimbal installation. The reversible mounting gimbal is fixed to to a
suitable site and the radio is placed into it. The radio can be removed for storage and the viewing
angle can be adjusted.
a recessed installation. The radio is recessed into a cavity cut into a bulkhead. The radio fixture is
permanent and the viewing angle cannot be adjusted.
Location Requirements
Please check these BEFORE doing any cutting or drilling.
Whichever installation method you choose, ensure that the chosen location:
is at least 3' (1 m) from the antenna
allows easy connection to (at least) a 10 Amp fused 13.6 V DC electrical source and the
antenna
is at least 1.5' (45 cms) from the compass to avoid creating magnetic deviation of the compass
during radio operation
has a suitable space close by for installing the microphone bulkhead mount
provides easy access to the controls on the front panel
provides reasonable access to the wiring at the back of the radio
The VHF has a large LCD screen
with an optimum viewing angle
of approx. +/-20 deg. Ensure the
chosen location provides a suitable
view of the display. Ideally, the user
should be directly in front of the
display or no more than +/-20 deg
from the front of the display.
Note: If unsure, temporarily power
up the radio and check for a
suitable location.
20˚
20˚
20˚
20˚
Side
Top
Installation
: