Filter
Top Products
EAGLE EVR-100 Operation Instructions6
Checklist
The following items should be supplied in the box. Check before starting the installation and con-
tact your dealer if an item is missing.
NOTE: An antenna is NOT provided. Consult your Eagle dealer for advice if necessary.
1
3
2
5
4
6
7
8
9
10
11
12
13
14
15
16
17 & 18
1. Mounting gimbal for the VHF radio
2. Power supply cable with inbuilt 3 Amp
fuse
3. External speaker connection cable with
white (+) wire and black (-) wire
4. Two mounting knobs
5. Microphone bulkhead mount
6. Four self-tapping screws for the mounting
gimbal
7. Four flat screws for the mounting gimbal
8. Four spring washers for the mounting
gimbal
9. Four plain washers for the mounting
gimbal
10. Four nuts for the mounting gimbal
11. Two self-tapping screws for the
microphone bulkhead mount
12. Two flat screws for the microphone
bulkhead mount
13. Two spring washers for the microphone
bulkhead mount
14. Two plain washers for the microphone
bulkhead mount
15. Two nuts for the microphone bulkhead
mount
16. Two flush-mount brackets for recessed
installation
17. Two M5x32 screws for recessedinstallation
18. Two M5x10 screws for recessed installation
19. Two plastic stoppers for the recessed
installation (not pictured)
20. Installation template (not pictured)
21. One 3 Amp spare fuse (not pictured)
in case of accidental reverse of battery
polarity
22. Base unit and microphone (not pictured)