Eagle Electronics ID 128 Fish Finder User Manual


 
11
FISH ID 128 PORTABLE ASSEMBLY
INSTALLING THE BATTERIESINSTALLING THE BATTERIES
INSTALLING THE BATTERIESINSTALLING THE BATTERIES
INSTALLING THE BATTERIES
Release the latch on the front of the battery case. Open the compartment
and install eight "D" cell batteries into the adapter. For the longest life, we
recommend you use alkaline batteries. This battery case will also hold one
rechargable battery instead of the "D" cells. See the enclosed coupon for
more information on the rechargable battery.
"D" CELL BATTERY
After installing the batteries, close the case and plug the power cable on
the battery case into the sonar unit. Plug the adapter cable into the back
of the sonar unit. Turn the sonar unit on. If it doesn't work, make certain
the battery terminals are making good contact against the battery contacts.
Also check the wiring connections on the D-cell battery adapter. The red
wire on the power cable should be attached to the red wire on the D-cell
battery adapter and the power cable's black wire should be connected to
the black wire on the D-cell battery adapter. If it still doesn't work, check the