Filter
Top Products
18
floats, air bubbles, etc. Individual tree limbs
extending outwards from a group of limbs are
the hardest objects for the Fish ID feature to
distinguish from fish. You may see Fish ID
symbols on the screen when, in fact, there are
no fish. Practice with the unit when the Fish ID
feature is on and off to become more familiar
with Fish ID. To turn this feature off, press a
menu key until the Fish ID feature’s menu
appears as shown at right. Now press the
down arrow key. To turn it on, repeat the
above steps, but press the down arrow key
instead.
The Fish ID feature can’t be used when the unit is in the manual mode. If
you turn the automatic feature off, the Fish ID feature will automatically be
turned off, also.
FISHTRACK™
This sonar automatically displays the depth of a target when the Fish ID
feature places a fish symbol on the screen as shown below left. This
feature is automatically enabled when the unit is turned on. To turn it off or
on again, press a menu key repeatedly until the Fish Track menu appears
as shown below. Now press the down arrow key to turn it off. Remember,
Fish ID must be on in order to use the Fish Track feature.