Filter
Top Products
OPERATING INSTRUCTIONS FOR GAMBIT EQUALIZER EQ1-DYN OPERATION
Daniel Weiss Engineering Ltd., Florastr. 42, CH-8610 Uster Page 15 of 27
) +41 1 940 20 06 2 +41 1 940 22 14 8 http://www.weiss.ch * weiss@weiss.ch
Remote Control
All band parameters as well as control settings can
be set externally.
To see remote control status refer to the status
display.
Protocol
To select a remote control protocol, press key C
from the status display menu. Select either “RS
232”, “RS 422” or “MIDI”. This will determine
which port at the rear of the EQ1 is active. The
other inactive ports will be ignored.
Press the “menu” key to return to the status dis-
play if you do not want to change remote on/ off
status.
When selecting a port other than MIDI you have
to specify the baud rate. Refer to the remote
control software manual for correct settings. The
set baud rate is displayed to ensure proper set-
up.
Channel
To change the remote control channel number,
press key C (adjacent to the remote control field).
Use the “gain/ data” encoder to select a value
between 1 and 16. Press the “menu” key to re-
turn to the status display.
The EQ1 does not support poly-mode (listening
on all channels). Select the same channel on the
controller software as is set internally, else no
remote control messages will be received.
On/ Off
To enable or disable remote control, press key C
(adjacent to the remote control field). Press it
again to toggle the “ON/ OFF”-value.
While remote control is off, data will still be sent
to the selected port. Also, the MIDI THRU output
will always mirror the MIDI IN input data re-
gardless of “ON/ OFF” or protocol status.
Software Information
Press the “menu” key, then select the “System ->
About” option. This displays a screen with all the
relevant information on your EQ1 and how to
reach us. Have this page ready when you want to
report a problem.
Self Test
Press the “menu” key, then select the “System ->
Selftest” option. This will start a procedure that
checks the functionality of all input and display
devices.