Elinchrom Ranger RX Marine Battery User Manual


 
11
Ranger/Free Lite S and A heads are designed specically for the Ranger RX battery pack.
The special ashhead bayonet plug with locking ring protects against dust and humidity.
The modelling lamp can be activated for 15 or 30 seconds.
By pressing the switch (-on the rear of the head-) once, the modelling lamp switches off
after 15 seconds, when pressing the switch twice within 2 seconds, the modelling lamp will
switch off after 30 seconds.
To switch off the modelling lamp earlier, (after two seconds) just press the touch button again.
• The maximum modelling lamp power for the pack is 100W / 12V for one connected ashhead
or two 50 W / 12 V for two connected ashheads.
• The standard Elinchrom reector tting with bayonet and breech lock accepts all Elinchrom/Prolinca
accessories manufactured since 1974.
• The Ranger/Free Lite S is a universal ashhead for all general studio and location work.
• The Ranger/Free Lite A head comes with a special, short ash duration ashtube, for action freezing
photography (One A head 1/2300 s two A heads 1/4310 s, t 0.5 at full power).
• Flashheads are tted with 3.5 m heavy duty cable.
• The Ranger/Free Lite ashheads cannot be insulated against humidity and dust.
• Only use them with suitable protection if wet or similary dangerous circumstances.
• Do not use near ammable/explosive material (min. 1m distance of any object)
• Do not open the unit. In the event of damage or apparent failure, contact a
repair service or any Elinca agent or email: elinca@elinca.ch
• For your safety, use only elinchrom ashhead.
Modelling lamp
Art. Nr: 23044
Modelling lamp switch
Lamp fuse 5AF
!
Safety Precautions
Ranger/Free Lite S and A Flashheads