Filter
Top Products
DEC 2012 DANIEL MODEL 788DVC DIGITAL CONTROL VALVES
TM
DISASSEMBLY AND REASSEMBLY5-8
PERSONAL INJURY AND/OR EQUIPMENT DAMAGE
Caution is required when performing any disassembly procedure as the Cylinder head is
bolted to a spring loaded cylinder assembly. Service should only be performed by trained
and qualified service personnel.
Failure to comply with recommended could result in serious injury and/or damage to the
equipment.
e. Lower the “new” cylinder assembly and cylinder head into the valve body. Align the
bolt holes in the cylinder head with the studs in the main valve body.
f. Fasten the cylinder head into position using retaining nuts. Tighten nuts, alternating
to opposite sides, to assure a uniform seat.
g. Return all tubing and/or valve accessories to their original position.