Filter
Top Products
DANIEL MODEL 788DVC DIGITAL CONTROL VALVES DEC 2012
TM
PARTS LIST 7-1
7.0 PARTS LIST
Table 7-1 lists the replacement parts for 2- through 6-inch Model V2700-20 Series Control Valves.
The item numbers in the parts list (Table 7-1) correspond with the sequence numbers in Figure 7-1.
This section contains the necessary parts required to assemble any standard unit that is covered in
this manual. Recommended spare parts have been indicated using an asterisk before the item
number. All part numbers shown reflect standard materials of construction. For other materials of
construction, special requirements or part numbers not listed, consult the factory.
TRADEMARKS:
Daniel ......................
TM
Daniel, a division of Emerson Process Management
Kalrez ................................
®
E.I. du Pont de Nemours and Company
Teflon ................................
®
E.I. du Pont de Nemours and Company
Viton .................................
®
E.I. du Pont de Nemours and Company
When ordering replacement parts you must furnish the following information:
• Valve serial number
• Part number, if available
• Part description
• Quantity required.
To order replacement parts, contact your Daniel sales representative.