Emerson 8610E Scuba Diving Equipment User Manual


  Open as PDF
of 20
 
4
CbN Series 2000
Gearmotors and Reducers
A
"O" RING
56C, 140TC
MOTOR
180TC - 280TC
MOTOR
A
C-Face Assembly
One-Piece Splined Coupling
Notes:
1. Install motor shaft key onto motor shaft.
2. Lubricate spline teeth of coupling and input shaft with Mobil
®
Grease XTC or equivalent coupling grease.
3. Install coupling onto motor shaft and set to the specified distance.
Refertotablebelow(dimension"A")forcorrectsettingdistances.
4. Apply thread locking compound to set screw and install. Tighten into coupling.
5. Assemblemotortogearreducerengagingsplinedcouplingandboltthemotortothec-face.
INPUT
TYPE
REDUCER SIZE
MOTOR
SIZE
A
(INCHES)
CbN
UE 20, 21, 22
56C, 140TC 3.06
180TC, 210TC 4.04
UE 23, 24
56C, 140TC 3.12
180TC, 210TC 4.11
250TC 4.75
280TC 5.64
U 25
140TC 3.86
180TC, 210TC 5.34
250TC 5.34
280TC 6.31
Mobilisbelievedtobeatrademarkand/ortradenameofExxonmobilOilCorporationandisNOTownedorcontrolledbyEmersonPowerTransmission.
Emerson Power Transmission Corporation cannot and does not represent or warrant the accuracy of this information.
 previous next