Emerson 8610E Scuba Diving Equipment User Manual


  Open as PDF
of 20
 
7
CbN Series 2000
Gearmotors and Reducers
Series 2000 CbN gearing is shipped with one of the following lubricants per the table below and fitted with a magnetic
drain.Eachreducerislledaccordingtothemountingpositionspeciedwhenordered.Refertounitnameplateandthe
chart on pages 5 and 6 for mounting position arrangement for your unit.
In the case of synthetic oil, the lubricant does not require changing but it is recommended that proper oil level be checked
periodically.
Standard Synthetic Gear Oil
Oil Capacities (U.S. Quarts) Mounting Positions
Gear Frame B3 B5 B6 B7 B8 B52 B53 B54 V1(BS) V3 V5 V6
2101 0.25 0.18 0.43 0.43 0.66 0.21 0.42 0.21 0.34 0.26 0.55 0.57
2201 0.33 0.26 0.52 0.52 0.79 0.32 0.53 0.32 0.49 0.36 0.63 0.74
2301 0.95 0.85 1.48 1.48 2.01 1.16 1.69 1.16 1.69 2.22 2.22 2.22
2401 0.63 1.06 1.59 1.59 2.64 1.69 2.64 1.69 2.43 2.96 2.22 2.22
2501 1.16 1.06 3.49 3.49 5.18 2.32 3.59 2.32 2.64 3.59 4.65 5.49
2002 0.23 0.42 0.41 0.41 0.62 —- —- —- 0.42 0.74 0.52 0.63
2102 0.49 0.34 0.87 0.83 1.24 —- —- —- 1.22 1.26 1.32 1.11
2202 0.57 0.62 1.39 1.34 2.19 —- —- —- 2.10 1.95 2.35 1.54
2302 1.60 1.69 3.04 2.88 4.46 —- —- —- 4.65 4.65 4.70 4.79
2402 2.10 2.64 5.09 4.76 7.52 —- —- —- 8.03 7.82 8.35 8.03
2502 3.70 4.44 8.88 8.03 13.1 —- —- —- 13.2 14.3 13.9 14.8
2602 6.55 6.34 16.8 15.9 25.9 —- —- —- 21.5 21.1 25.4 27.9
2702 8.77 8.45 23.6 22.9 37.3 —- —- —- 31.0 27.3 36.2 39.2
2802 16.2 15.4 47.6 44.9 74.0 —- —- —- 60.2 56.0 78.2 71.9
2902 19.0 —- 74.0 69.7 123 —- —- —- —- —- 126 110
2103 0.46 0.32 0.87 0.85 1.24 —- —- —- 1.24 1.27 1.32 1.07
2203 0.56 0.55 1.34 1.33 2.20 —- —- —- 2.06 1.87 2.24 1.50
2303 1.51 1.48 3.02 2.81 4.34 —- —- —- 4.54 4.44 4.61 4.66
2403 1.90 2.32 4.81 4.63 7.52 —- —- —- 7.71 7.61 8.03 7.82
2503 3.28 4.23 8.35 8.03 13.0 —- —- —- 13.1 14.4 13.6 14.1
2603 5.92 5.71 15.9 16.0 25.7 —- —- —- 21.3 21.3 27.1 28.4
2703 7.93 7.61 22.2 23.0 37.0 —- —- —- 31.4 27.5 38.7 39.9
2803 14.6 13.9 44.9 45.2 72.9 —- —- —- 52.8 56.0 83.5 72.9
2903 18.0 —- 72.9 68.7 122 —- —- —- —- —- 125 109
Ambient Range of Installation
-4°F to 14°F
(-20°C to 10°C)
14°F to 122°F (-10°C to 50°C)
122°F and Above
(50°C +)
No Backstop With Backstop
ISO VG 68 ISO VG 100 ISO VG 150 ISO VG 220 ISO VG 150 ISO VG 320
Acceptable Mineral Oil Lubricants
*Thefollowingarebelievedtobethetrademarksand/ortradenamesoftheirrespectiveowners,andarenotownedorcontrolledbyEmersonPowerTransmission.FuchsandSintogear:FuchsPetrolub
AG;Mobil:ExxonMobilCorporation;OmalaandShell:ShellTrademarkManagementB.V.
CAUTION: Never mix synthetic oil and mineral oil.
Never use lubricants with extreme pressure (EP) additives in a HWN Gearmotor or
Reducer.
No Backstop
Manufacturer
-25° F to 125° F
(-30° C to 50° C)
Fuchs* Sintogear* 125
Mobil* SHC 629
Shell* Omala* Fluids HD 150
With Backstop
Manufacturer
-25° F to 125° F
(-30° C to 50° C)
Shell* Omala* RL 100
 previous next