Filter
Top Products
25
TRIM CALIBRATION
Press to begin Trim Calibration, then follow the on-screen
instructions.
Step 1: Set your engine to its full down position, then press .
Step 2: Set your engine to the top of its trim range (prop still in water),
then press .
Step 3: Set your engine to the top of its trailer / full-up position, then press
.
Once step 3 is completed, the screen will display “TRIM CALIBRATION
COMPLETE” and the icon on the Save Changes bar will
automatically highlight. If ALL steps were followed correctly, press
to save. will appear to confirm that the changes
have been saved. If ALL steps were not followed correctly, use the
navigation pad to highlight and press . will
appear to confirm that the changes have not been saved.
The Antares will automatically return to the previous screen.