Filter
Top Products
2-2
DJ-1
For MODEL1823C-BB/1833C-BB/1933C-BB/1943C-BB/1953C-BB, remove the
waterproofing cap from the DJ-1 port on the processor unit and discard it.
GD-1900C-BB: Do not remove the waterproofing cap. Wrap the connector nut and cap
with vinyl tape as shown below.
Connector nut (for 24P)
Waterproofing cap (yellow)
Vinyl tape
Waterproofing cap and connector nut, sectional view
DATA1 to DATA3
Other equipment can be connected to DATA1-DATA3 as shown below.
DATA1 (7P) DATA2 (6P) DATA3 (6P)
GPS receiver
GP-310B/320B
NMEA sentence
(ex. navaid)
Heading sensor (ex. SC-60/120)
(MODEL series only)
This equipment can receive the following NMEA 0183 format sentence from external
equipment.
•
Own ship’s position: GGA>RMC>RMA>GLL ● Time: ZDA
•
Ship’s speed: RMC>RMA>VTG>VHW ● Other ship’s information: TTM
● Satellites in view: GSV ● Wind speed and angle:
•
Heading (True): HDT>HDG>HDM HWV>VWT>VWR
•
Heading (Magnetic): HDT>HDG>HDM
•
Course: RMC>RMA>VTG
•
Depth: DPT>DBT
•
Temperature: MTW
You will need the optional NMEA cable to connect with other equipment (E/S, navaid, etc.).