Filter
Top Products
2. WIRING
2-4
Procedure
1. Twist the cores.
2. Press the terminal opener downward.
3. Insert the wire to hole.
4. Remove the terminal opener.
5. Pull the core to confirm that it is ecure.
Terminal opener
WAGO Connector
Wire
Twist
Press downward.
Wiring for WAGO connector
03P9349
Connector
plug
S901
MPYCY-19 cable
Antenna unit, internal view
8. Confirm that all screws are tightened and all wiring is properly made. Confirm that
waterproofing gasket, bolts and tapping holes of antenna unit are coated with silicone
grease.
9. Attach the antenna covers (torque: 2.5 N·m).