Filter
Top Products
3-1
3. SETTING AND ADJUSTMENT
3.1 DIP Switch Setting
The DIP switch setting as follows.
1. Remove the top cover of the processor unit.
2. Open the SPU assembly block.
Shield cover
SPU assembly block
SPU board 03P9337
DIP switch S1
3. Set the DIP switch S1 as follows.
S1
Monitor SXGA
(1024x1280,
Default)
Monitor UXGA
(1024x1360)
1 OFF ON
2 OFF OFF
3
4
Not used.
Note: Set #1 and #2 of S1 to OFF for MU-231CR S. No. 0268 and earlier.
1
2
3
4
OFF
ON
S1