Filter
Top Products
5–8
distance run between ports and the total distance the total distance
run from port “A” to “D”.
Resetting voyage distance
To reset the voyage to zero, press the VOYAGE RESET key.
Resetting voyage distance
The total distance can be set to any desired value on the initial
setup menu. See page 9-12.
Selecting unit of distance
You may select the unit of distance “nm” (nautical mile) or “km”
on the system menu. See page 11-1.
The drift (4), water current (15), and relative wind (16) are
graphically displayed.
The rate sensor chosen in the INT. SETUP menu is displayed:
Internal, External ROT or External HDG.
22. Graphic
display
23. Rate Sensor