Filter
Top Products
21
3.3
Setting Ship Type
1. In the INITIAL SETTINGS window, press the ▲ or ▼ key to choose the SET
SHIP TYPE and press the [ENT] key.
[SET SHIP TYPE]
TYPE NO : 0 *
* * * * TYPE DETAIL * * * *
NOT AVAILABLE
2. Press the [ENT] key and set number for ship type by using ▲ or ▼ key,
referring to the table below.
Table: Ship type
No. Ship type
1 Future use
2 WIG WIG: Wing in ground
3 Vessel
4 HSC HSC: High speed craft
5 Special craft
6 Passenger ships
7 Cargo ships
8 Tanker
9 Other type of ship
(For details, see “§1.5 Setting Up for Voyage” on the operator’s manual.
3. Press the [MENU] key to save the setting.
3.4 Setting I/O Port
Setting COM port/PC port
1. In the INITIAL SETTINGS window, press ▲ or ▼ key to choose the SET I/O
PORT and press the [ENT] key.
[SET I/O PORT]
COM1COM1
SET PC PORT
SET LAN PORT*
SET PRIORITY
SET COM PORT
QUIT[MENU]
*: Only when LAN kit (option) attached.
SET I/O PORT menu