Filter
Top Products
15
How to attach wires to the WAGO connector
Procedure
1. Twist the cores.
2. Press the terminal opener downward.
3. Insert the wire to hole.
4. Remove the terminal opener.
5. Pull the wire to confirm that it is secure.
Terminal opener
Wiring for WAGO connector
WAGO connector
Wire
Twist
Press downward.
Fabrication of power cable DPYC-2.5
40 mm: Peel paint.
Taping
Armor
50 mm
6 to7 mm
Vinyl sheath
Clamp here by cable clamp.