Filter
Top Products
1. OPERATIONAL OVERVIEW
1-12
How to close a session
To manually close a session, select it with the TAB key. Rotate the CHANNEL/EN-
TER knob to select [QUIT] in the user options area then push the knob. The session
icon disappears from the tab area.
When there is no operation for the time specified (see section 5.8), the inactive ses-
sion is automatically closed.
Processing when the number of sessions is maximum
A maximum of seven sessions can be displayed in
the tab area. If a seventh session starts, the mes-
sage as shown in the right figure appears on the
screen. Press the CANCEL key to close the mes-
sage. Close a session to make space for the new
session.
If the eighth session is for sending a distress alert, all sessions except that session
automatically close, and the session starts.
If the eighth session is for receiving DSC message,
the lowest-priority session automatically closes
and the message as shown in the right figure ap-
pears. Press the CANCEL key to close the mes-
sage.
1.15 Replay Function
You can replay a recorded voice, which has been received recently, for a total of 120
seconds. The recorded voices are saved in this equipment with the channel informa-
tion, and deleted when turning the power off.
To replay the recorded voice, press the REPLAY key.
When the replaying is finished, the indication changes to .
To change the track number, rotate the CHANNEL/ENTER knob to select the track
number desired then push the knob to replay the selected data.
To stop the replaying and close the screen in the middle, press the CANCEL key. Al-
so, you can stop the replaying with the CHANNEL/ENTER knob. In this case, the [RE-
PLAY] screen does not close.
Note: When the time limit (120 seconds) has passed, the recorded data is deleted per
track in earliest to latest order.
Appears only when
the squelch opens.