Filter
Top Products
4-15
4.4 Performance Monitor PM-30
Necessary parts: PM-30 and OP03-150 (Code no. 008-485-490)
Contents of Performance Monitor Kit OP03-150
emaNepyTytQ.oNedoC
draoBNI-MP5229P301026-784-800
BwercSdaeh-naPW0072C8X3M3404-188-000
.yssArotcennoCAA-003L-P3HV2410-141-000
1. Open the monitor and fix it with the stay. See Chapter 1 for instructions.
2. Fasten the PM Board 03P9225 to the location shown below with three screws
(M3X8).
✂
J401
J411
PM Board
03P9225
J402
J403
Figure 4-15 Display unit, inside view
3. Connect J411 to J401 on the PM Board.
4. Connect two connector assemblies (VH3P-L300-AA) to J402 and J403.
5. Solder the other end of the connector assemblies with external cables, one
from ship’s mains and one from the PM-30.
6. Close the monitor.