Filter
Top Products
4-18
4.6 AC-DC Conversion Kit
The AC-DC Conversion Kit enables conversion from AC power to DC power, and
mainly consists of a circuit board and filter.
)annetnampr42rof(tiKnoisrevnoCCD-CA
067-994-800:.oNedoC,42-161-30PO:epyT
)annetnampr24rof(tiKnoisrevnoCCD-CA
77-994-800:.oNedoC,24-161-30PO:epyT
emaNepyT.oNedoCytQemaNepyT.oNedoCytQ
REWOP
draoB
A6429P30044-784-8001REWOP
draoB
C6429P30007-394-8001
retliF)CD(421-PDR064-294-8001retliF)CD(421-PDR064-294-8001
1. Slide the monitor forward until the PTU Board and filter are in view and easily
accessed.
2. Follow (2) and (3) on page 1-8 to remove the PTU Board cover.
3. Unplug all connectors from the PTU Board.
4. Loosen the screws fixing the PTU Board, and then remove the PTU Board.
5. Fasten new PTU Board with screws removed in step 4.
6. Plug in six connectors to their proper locations on the PTU Board. Do not con-
nect J101.
7. Loosen four screws fixing the AC filter.
8. Fasten new filter.
9. Connect cable from filter to J101 on the PTU Board.
10.Fasten the PTU board cover.
11.Connect power cable from ship’s mains.
12. Close the monitor.
J106
J105
J104
J103
J446
J466
J462
J465
Screw
(M3X8, 5 pcs.)
*
*
*
*
Slide forward
h
Screw (M4X8, 2 pcs.)
Knob
Filter
(Shown:
AC type)
PTU Board (behind shield cover)
Power cable
leads
*
Unfasten
screws.
Figure 4-17 Display unit, inside view