Filter
Top Products
3-1
3. ADJUSTMENT AND CHECK
3.1 Hull Unit Check
Note: Before conducting this check (at the dry dock) transmission must be
stopped.
Default setting of TX transmission is OFF. Confirm as follows.
1. Turn on the power, and then press the [MENU] key to show the main menu.
MENU QUIT
H-SCAN SETTING...
V-SCAN SETTING...
OTHERS...
TX PULSE LENGTH-H : 9
TX POWER-H : 9
TVG-NEAR-H : 0
TVG-MEDIUM-H : 0
TVG-FAR-H : 0
AGC-H : 0
2ND AGC-H : 0
ECHO AVERAGE-H : 0
COLOR-H : COLOR 1
COLOR RESPONSE-H : COLOR CURVE 3
Main menu
2. Use the trackball to select OTHERS and press the [MENU] key.
OTHERS
MENU QUIT
QUIT
ES1 SETTING...
ES2 SETTING...
ERASE MARKS...
DISPLAY SETTING...
FISH ALARM & AUDIO...
PRESET, MEMORY CARD...
INITIAL SETTING...
OTHERS menu